Minimalist 2 season synthetic insulated jacket for light layering, with a short body and generous sleeve length.
At 7 ounces for a size medium the hooded JMT packs tremendous warmth and function in a small, all conditions package.
This product is no longer in stock
The JMT Sweater is our lightest insulated shell. Designed for summer layering in the mountains, it's named after the classic John Muir Trail in the Sierra. View it as an insulated windbreaker.
Built with Climashield APEX, a lightweight yet remarkably efficient synthetic insulator, the JMT will retain some warmth when damp, and will dry and recover more quickly than down.
The JMT Sweater is trim and devoid of clumsy features. It is best applied as a windproof, warming layer over one or two thin thermal shirts.
Additionally, the JMT can be put to use as extra core insulation while sleeping, thus making a lighter sleep system possible.
This is not an 'Active Insulation' layer. However the JMT would make a great companion piece to this new breed of outerwear, such as the Patagonia Nano Air Light, for comfort at a full range of conditions with very little weight and bulk.
This is a simple jacket, lean on features, with the focus being as much warmth for the weight as possible. In its basic configuration the APEX insulation makes up over 55% of the total weight.
The JMT is available with a full separating front zipper or a half length pullover style zipper. The latter saves 10-15g, but can also prolong the life of the garment while making it easier to handle in strong winds.
We build it with or without an integrated hood. The hood option is fully insulated and offers complete coverage to above the chin - but it is not helmet compatible. In fact, for most users, only a very thin beanie will fit under this trim hood.
The chart below reflects the JMT with a hood. Choosing a collar will save 20-25g depending on size.
We make the JMT Sweater without any exterior pockets. The hood casing have a fixed, pre-tensioned shockcord. The JMT does not have an elasticized waist cord.
The sleeve ends are cut trim with no additional closure offered.
APEX by Climashield, a superior continuous filament synthetic insulation, is the choice here.
For the JMT Sweater we use 2.2oz/yd - 75g/m Climashield APEX which is light, compact, and applicable for 2, maybe 3 season use. With minimal sewn through stitch lines (virtually none on the shell), and substantial loft in the APEX, the JMT is surprisingly warm as well as very resistant to moisture from sweat and weather.
The JMT can be configured with a 10d shell* in a number of different colors. It's an ultralight fabric for folks who want the lightest, but realize that abrasion and tear resistance is minimal.
Also available is a 7d shell** with advanced weatherproofing qualities.
The inside liner is always the breathable 10d.
*10d. Smooth, comfortable and about the lightest material possible for practical shell use, at 0.67 oz/yd. Very breathable with minimal moisture repellency. Also the standard inside liner. Black, Moroccan Blue, Burnt Orange, Coyote Brown and Royal Purple.
**7d. A special material based on an ultralight, yet relatively durable 7d base fabric with a breathable micro porous coating. The 0.74 oz/yd Robic excels at shedding mist and light rain. A so-called waterproof/breathable fabric, this high tech shell sports a HH (hydrostatic head) of 1000mm, while providing enough vapor transfer for mild activities (good breathability).
The stock cut is aimed at providing a short jacket with a trim fit, best when used over only one or two lightweight thermal layers. Compared to the Skaha/PCT line of APEX hoodies, the JMT Sweater is roughly a size smaller.
The chart and configuration menu below outlines the many options for sizing the JMT Sweater. Tall people may wish to go up in zipper and back length. Likewise, folks with long arms will know when to add to the sleeves.
Colors pictured: Moroccan Blue with Burnt Orange liner, and Black with Coyote Brown liner.